Our consumables range includes metal marking solutions, hold down mats, industrial cleaners and double sided tape. These are all available for nationwide delivery

LaserBond 100 Spray

Standard Features:

  • For Product Identification, Decoration, Branding and more.
  • Quick and Easy to Use
  • Permanent & High Contrast Marking.
  • Will not Crack or Peel.
  • Resistant to Corrosion, Abrasion & Fading

Aerosol Spray for Blackening Laser Marked Surfaces

LaserBond™ 100 all purpose aerosol spray creates solid black marks on un-coated metals including; stainless steel, brass, aluminum, copper, chrome plating and many more. LaserBond™ 100 all purpose aerosol spray is premixed at the correct consistency, so no diluting is necessary and it uses the latest in nano particle technology. Applied like a regular can of spray paint, one can will cover approximately 2500+ square inches.The versatility of LaserBond™ 100 is due to its nanoparticle technology saving you money by not having to purchase several different products to mark or decorate various types of surfaces.

 

LaserBond 100 Ink

Standard Features:

  • For Product Identification, Decoration, Branding and more.
  • Quick and Easy to Use
  • Permanent & High Contrast Marking.
  • Will not Crack or Peel.
  • Resistant to Corrosion, Abrasion & Fading.

LaserBond 100 Liquid Ink is a water-based concentrate and needs to be shaken vigorously for 1 – 2 minutes to insure that all ingredients are thoroughly mixed and then diluted with denatured alcohol by at least 1:1 for manual application using, preferably, a foam brush OR by at least 2:1 for application using an airbrush or spray gun and it is recommended that the spray be applied by holding the nozzle about 10” – 12” away from the surface and misting the LaserBond 100 directly onto it using a side-to-side motion. Dilution ratios of up to 5:1 have proven to work successfully; however you should start with these lower dilution guidelines and increase the amount of denatured alcohol until a smooth and even coat is achieved. The dilution with denatured alcohol is important as it helps to break the surface tension and keeps the LaserBond 100 from beading up or separating/streaking on the substrate surface.

Seklema Hold Down Mat

1220 x 610, 610 x 305 mm

A 2 sided self healing material designed to hold materials on your engraving table without the use of table tapes and jigs.
It works with metal and plastic engraving stock as well as many other materials. It is resusable and can easily be cleaned with only a soft sponge and water.

Industrial Cleaner

  • Simple removal of adhesive residue, labels, and adhesive tape
  • Dissolves stubborn dirt such as wax, rubber abrasion, silicone residues, permanent marker, oil and grease
  • No unpleasant odours for users and the environment.
  • Fast and effective cleaning.
  • Delicate surfaces such as aluminium, brass and stainless steel are not attacked.


High-quality special cleaner which will remove any residue after laser engraving.

  • Colour: Transparent
  • Chemical basis: Special benzine with D-limonene
  • Smell/fragrance: Characteristic
  • Density: 0.74 g/cm³
  • Min. flashing point: 10 °C
  • Hazard class (German Ordinance on Combustible Liquids): AI
  • Shelf life from production/conditions: 24 Month / below 25°C

3M 467MP

305 mm wide x 55 mts

  • Up to 400°F short-term heat resistance
  • Excellent solvent resistance
  • Excellent shear strength to resist slippage and edge lifting
  • Excellent moisture resistance
  • UV Resistant

3M™ High Performance Acrylic Adhesive 200MP is a popular choice for graphic attachment and general industrial joining applications. It provides outstanding adhesion to metal and high surface energy plastics. This adhesive provides some initial repositionability for placement accuracy when bonding to plastics. It also performs well after exposure to humidity and hot/cold cycles.

© Copyright Leinster Laser 2020